993 cc, air-cooled OHV Vanguard Big Block V-twin engine with horizontal crankshaft for longer life
EXCLUSIVE T-DRIVEâ„¢ TRANSMISSION
Tandem 16cc Parker pumps-in-reservoir transmission is specifically designed for turf-care applications
In-line CoolFanâ„¢ cooling system and integrated, replaceable, high-efficiency fine-particle filter
Design directs more power to the cutting deck as power-sapping components are eliminated
HEAVY-DUTY DECK
Extra-deep, 5.5-inch deck is fabricated from heavy-gauge formed steel with a reinforced anvil edge
Specially designed cutting chambers enhance airflow for better cut quality
Deck easily converts from side discharge to optional Down Dischargeâ„¢ mulching or PowerVacâ„¢ collection
Sentryâ„¢ spindles with massive, 8-inch flanges anchored in a 6-bolt pattern, spread the force of impact for greater strength
Spindle planes are fabricated from double-layered formed steel laminate and combine with the spindles to form a triple-strength deck to keep blades level and deliver a high-quality cut
Sentryâ„¢ spindle guards shield spindle housing and seal lower bearings from fiber wrap and dirt ingestion
POWERFOLD® ELECTRIC DECK LIFT
Standard on all FrontMount™ DuraMax® decks 48-inch and larger, PowerFold® is the zero-turn mower industry's first electric deck lift (introduced in 2004).
PowerFold® rotates the deck nearly 90 degrees to provide easy access to the underside of the deck for simplified maintenance and mulching package installation, plus space-saving portability and storage.
The feature also adjusts cutting height between 1.25 and 5.0 inches and controls deck lift functions using a single switch.
WARRANTY
Commercial Use: 3-year unlimited hours; limited warranty: First two years covering parts and labor; last year covering parts only.
Residential Use: 4-year or 800-hour (whichever comes first); limited warranty covering parts and labor.
ANTIVIBE POWER PLATFORM®
Isolates the engine and T-Driveâ„¢ from the operator platform for an unprecedented vibration-free experience
MINIMAL MAINTENANCE
Fewer than 10 grease points and easy top-side access to belts and filters
1,000-hour transmission fluid change intervals
Self-tensioning belts minimize cost and labor on routine maintenance
BUILT FOR LONG LIFE
Robotically-welded, high-grade steel construction and I-beam reinforcement for long-lasting durability
Centered-bearing design provides greater load-bearing capacity to easily handle the weight of operator, fuel and high-capacity collector with reserve strength for curb shocks and weight shifts
Tough-as-nails powder-coated finish is fusion-bonded for chip and rust resistance
ULTIMATE OPERATOR STATION®
The deep-cushioned, deluxe Premium Comfort Seat features a coil-spring suspension and padded lumbar support for all-day comfort. Iso-mounting eliminates vibration before it reaches the seat, and both padded seat and armrests are covered in scuff-resistant, breathable CoolTemp Cordura® fabric, which dissipates heat and won’t tear or crack with extended use.
ULTIMATE OPERATOR STATION®
Operational controls including throttle, choke and angled View-Ezeâ„¢ console and adjustable cup holder are well positioned for visibility and ease of reach
ULTIMATE OPERATOR STATION®
One- or two-handed operation with QuikAjust Tiltâ„¢ dual levers with 9-inch comfort range to custom fit operator's reach. Levers automatically return to neutral from either forward or reverse position and are less strenuous than riding mowers with steering wheels.
VIGILANT OPERATOR PRESENCE SYSTEMâ„¢
Standard, low profile Roll-over Protection System (ROPS) structure with an adjustable seatbelt
Dampened steering levers that return to neutral from forward and reverse
Interlock switches that shut down the engine when the operator leaves the seat while PTO is engaged or levers are in drive position
WIDE-STANCE SINGLE-FORK TAIL WHEELS
Wide stance single-fork tail wheels provide increased flotation and stability for a smoother ride.
QUIIKCONVERTERâ„¢ IMPLEMENT CAPABILITY
Add or remove implements in minutes without tools with QuikConverterâ„¢ Implement System
Equip your out-front mower with a wide range of tools, including turf cleanup, renovation and snow removal implements that extend your productivity year-round
LED WORK LIGHTS
LED work lights provide improved visibility in low light situations.
Videos
Videos
Options
OPTIONS
PREMIER SUSPENSION SEAT
Optional premier suspension seat provides the ultimate in operator comfort. Low-profile seat slides fore and aft and includes an integrated shock absorber that manually adjusts to operators between 100 – 300 lbs. Other ergonomic features include a backrest that tilts from -5 degrees to +30 degrees, a lumbar support mechanism, adjustable armrests and a retractable seat belt.
WIDE SEAT CONVERSION KIT
Provides additional seating room for larger operators or to accommodate cell phones or pagers. Requires seat belt extension.
EXTENDED STEERING LEVERS
Provides an additional two inches of leg clearance
FOLDABLE ROPS
The Foldable ROPS allows the two-post ROPS to be lowered for mowing under low-hanging trees and other overhead obstacles, or for storing and transporting in enclosed trailers with low door clearance. CAUTION: Avoid drop-offs, embankments and steep slopes. Do not allow ROPS to provide a false pretense of security in hazardous areas and avoid questionable conditions. Always wear seatbelt when Foldable ROPS is in up-right position. When Foldable ROPS is down, DO NOT use seat belt, and drive with extra caution.
SIDE DISCHARGE CONTROL KIT
Control the discharge of the mower deck to avoid putting clippings in flower beds and on sidewalks
TURF TREAD TIRES
Turf Tread Drive Tires provide overall excellent performance on level mowing areas.
TAIL WHEEL OPTIONS
Single- or Dual-fork tail wheels
Michelin® X® Tweel® Airless Tail and Deck Wheels
Smooth tread, 13x6.50x6 tail wheel. Performs like a pneumatic tire, but without the inconvenience and downtime associated with flats. Also available for 72-inch deck wheels. Not for use with PowerVac Collection Systems.
SUNSHADE CANOPY VINYL
Lightweight, water repellent, UV-resistant vinyl canopy mounts easily to OPS or ROPS to limit exposure to direct sunlight, reducing eye strain and increasing operator comfort.
SUNSHADE CANOPY ALUMINUM
Diamond-plated aluminum canopy is highly resistant to abrasions. Easily mounts to ROPS or OPS to increase operator comfort by limiting exposure to direct sunlight and reducing eye strain. Canopy tilts up and down for customized comfort. (Optional fan and light kits increase comfort and roadside visibility.)
YELLOW BEACON LIGHT
Yellow beacon attaches to OPS or ROPS to provide greater visibility in high-traffic areas.
HYDRAULIC DECK LIFT
Raises the front of the deck to maneuver over soft or uneven ground and to clear curbs, trailer ramps and other obstacles. Lift switch is standard in lever on current models. Kit includes Universal Wiring Harness and requires 50-lb. counterweight and counterweight mount kit.
FILTER MINDER KIT
The Filter Minder alerts the operator when airflow is restricted in the air canister on dual-element air filters. The Filter Minder is available as an option on all MidMountâ„¢ models except V Series, 225, 327 EFI and 321D. (Standard on 400 Series)
ADJUSTABLE CUP HOLDER
An Adjustable Cup Holder locks into multiple positions to accommodate a wide range of drink sizes.
ARMREST HEIGHT ADJUSTMENT SWITCH
Used in conjunction with PowerFold® electric deck lift/height adjustment, this armrest-mounted switch controls deck lift functions and adjusts cutting height between 1.0 and 4.5 inches on the go.
DOWN DISCHARGEâ„¢ MULCHING PACKAGE
The optional Down Dischargeâ„¢ mulching package with GrassMaxâ„¢ medium-lift blades cuts and recuts clippings and directs them deep into the grass bed, enriching turf and producing a beautifully manicured cut.
FULL FLOTATION DECK INSERTS
Allow for controlled side-to-side flotation of the deck in rolling terrain for a smooth, even cut.
35 SERIES DEDICATED REAR DISCHARGE DECKS
Dedicated 52-, 61- and 72-inch, extra-deep, 5.5-inch 35 Series rear discharge decks deliver revolutionary performance for applications where keeping clippings off sidewalks, driveways and parking lots is critical.
REAR DISCHARGE SHIELD KIT
Optional rear discharge shield kit converts 34R Series decks to direct clippings out the back of the deck for a smooth cut and no windrowing.
AIR DAM KIT
An optional Air Dam Kit can be installed along the front edge of most mower decks to minimize dust and dirt escaping from the front of the mower.
SPEEDTRIMMINGâ„¢ ROLLER KIT
The optional SpeedTrimming™ heavy-duty, anti-scalp roller kit for 52-inch and larger DuraMax® decks speeds close trimming near buildings, fences retaining walls and other landscaping features. Kits available for both left and right sides of cutting decks.
YOUR CHOICE OF DECKS
52-, 61- or 72-inch 34 Series DuraMax® and 61-inch 36 Series (3661) side-discharge decks easily convert to Down Discharge™ mulching or PowerVac™ collection. All come standard with PowerFold® electric deck lift/height adjustment.
52-, 61- or 72-inch 35R Series and 61-inch 37R Series (3761) dedicated rear discharge decks come standard with PowerFold® electric deck lift/height adjustment.
WEATHERBEATER® WINTER ENCLOSURE
The full-view metal cab keeps moisture out and heat inside to keep the operator comfortable and productive. Standard electric windshield wiper clears windshield during operation. Powerful LED lights light up your path. Counterweight required.
QUIKCONVERTER® IMPLEMENTS
Every FrontMountâ„¢ mower accepts a range of time- and labor-saving QuikConverterâ„¢ implements for even greater flexibility and productivity year-round.
POWERVAC® FRONTMOUNT COLLECTION SYSTEM
Powerful, deck-driven PowerVac™ collection systems deliver one-pass perfection every time, and are available with a wide range of twin or triple mesh bag or high-capacity metal hopper collectors. Quik-D-Tatch® Vac drive can be removed in seconds without tools
Specifications
Specifications
Engine
Engine Type
61" 735BT
B&S Vanguard Big Block, V-Twin
72" 735BT
B&S Vanguard Big Block, V-Twin
Displacement
61" 735BT
60.6 cu. in. (993 cc)
72" 735BT
60.6 cu. in. (993 cc)
Lubrication
61" 735BT
Pressure Lube
72" 735BT
Pressure Lube
Crankshaft
61" 735BT
Horizontal
72" 735BT
Horizontal
Engine Cooling
61" 735BT
Air
72" 735BT
Air
Fuel Type
61" 735BT
Gasoline - unleaded
72" 735BT
Gasoline - unleaded
Fuel Capacity
61" 735BT
7.2 U.S. Gal. (27.3 l)
72" 735BT
7.2 U.S. Gal. (27.3 l)
Optional Fuel Capacity
61" 735BT
NA
72" 735BT
NA
Air Cleaner
61" 735BT
Heavy-duty, remote mounted, cyclonic, dual element air filtration.
72" 735BT
Heavy-duty, remote mounted, cyclonic, dual element air filtration.
Muffler
61" 735BT
Ultra quiet, single, industrial type
72" 735BT
Ultra quiet, single, industrial type
DuraMax Decks
DuraMax® Deck
61" 735BT
DuraMax®
72" 735BT
DuraMax®
Mulch Kit #
61" 735BT
504569
72" 735BT
504571
Deck Size
61" 735BT
61"
72" 735BT
72"
Cutting Height Range
61" 735BT
1.25 to 5.0 in. (3.2 cm to 12.7 cm)
72" 735BT
1.25 to 5.0 in. (3.2 cm to 12.7 cm)
Deck Construction
61" 735BT
Tubular 2.25 in. x 4 in. boxed members with 0.25 in. gussets. Formed double thickness hardened steel (0.269 in. †7.6% thicker than 0.25 in. (6.35 mm)) truss spindle plane and (3) Sentry™ spindles and a triple-strength upper deck, 1/2 inch thick in stress zones. Geometrically engineered design with 7-gauge skirts withstands the brunt of commercial mowing. Anvil-edge design with o.5 in. (12.7 mm) reinforcement on front edge of deck.
72" 735BT
Tubular 2.25 in. x 4 in. boxed members with 0.25 in. gussets. Formed double thickness hardened steel (0.269 in. †7.6% thicker than 0.25 in. (6.35 mm)) truss spindle plane and (3) Sentry™ spindles and a triple-strength upper deck, 1/2 inch thick in stress zones. Geometrically engineered design with 7-gauge skirts withstands the brunt of commercial mowing. Anvil-edge design with o.5 in. (12.7 mm) reinforcement on front edge of deck.
Deck Blades
61" 735BT
21 in. (53.3 cm)
72" 735BT
25 in. (63.5 cm)
Deck Spindles
61" 735BT
Sentry™ Spindle System, 2.5 cm (approx. 1 in.) O.D. shaft. Double bearings greasable from top of deck. Spindle head designed to eliminate fiber wrap. Spindle cones shield housing and lower bearings from fiber wrap and dirt ingestion.
72" 735BT
Sentry™ Spindle System, 2.5 cm (approx. 1 in.) O.D. shaft. Double bearings greasable from top of deck. Spindle head designed to eliminate fiber wrap. Spindle cones shield housing and lower bearings from fiber wrap and dirt ingestion.
Spindle Housing
61" 735BT
8 in. (20.3 cm)-diameter machined aluminum housing with 6-bolt pattern.
72" 735BT
8 in. (20.3 cm)-diameter machined aluminum housing with 6-bolt pattern.
Blade Drive
61" 735BT
Maintenance-free gearbox with single Kevlar V-belt and idler arm tensioning.
72" 735BT
Maintenance-free gearbox with single Kevlar V-belt and idler arm tensioning.
Deck Trimability
61" 735BT
8.5 in. (21.6 cm)
72" 735BT
13.75 in. (34.9 cm)
Starter & Electrical System
Battery
61" 735BT
12 Volt
72" 735BT
12 Volt
Starter
61" 735BT
Solenoid shift
72" 735BT
Solenoid shift
Ignition
61" 735BT
Breakerless
72" 735BT
Breakerless
Interlock System
61" 735BT
Prevents engine start when PTO clutch is engaged or steering levers are in drive position. Allows operator dismount without engine shutdown only when PTO is disengaged and steering levers are locked in neutral.
72" 735BT
Prevents engine start when PTO clutch is engaged or steering levers are in drive position. Allows operator dismount without engine shutdown only when PTO is disengaged and steering levers are locked in neutral.
Ultimate Operator Station
Operator Seat
61" 735BT
Premium Comfort Seat, embroidered logo, iso-mounted, high-back, deep-cushioned, foam-padded CoolTemp Cordura-covered, padded arms/backrest with lumbar support and coil-spring suspension. Optional CoolTemp Cordura-covered Premier Suspension Seat.
72" 735BT
Premium Comfort Seat, embroidered logo, iso-mounted, high-back, deep-cushioned, foam-padded CoolTemp Cordura-covered, padded arms/backrest with lumbar support and coil-spring suspension. Optional CoolTemp Cordura-covered Premier Suspension Seat.
Suspension
61" 735BT
AntiVibe PowerPlatform™ with iso-mounted seat and footrest
72" 735BT
AntiVibe PowerPlatform™ with iso-mounted seat and footrest
Console-mounted Instruments
61" 735BT
Low engine oil pressure and parking brake warning lights, digital hour meter, work lights, ignition and push/pull PTO switches.
Choke integrated with throttle lever.
72" 735BT
Low engine oil pressure and parking brake warning lights, digital hour meter, work lights, ignition and push/pull PTO switches.
Choke integrated with throttle lever.
Work Lights
61" 735BT
Standard - LED
72" 735BT
Standard - LED
Hour Meter
61" 735BT
Standard
72" 735BT
Standard
Transmission & Steering
Transmission Type
61" 735BT
T6® hydrostatic transmission with tandem 16 cc Parker pumps-in-reservoir, in-line CoolFan™ for cooling efficiency, design-matched Parker high-torque wheel motors. AntiVibe Power Platform® reduces vibration for the operator.
72" 735BT
T6® hydrostatic transmission with tandem 16 cc Parker pumps-in-reservoir, in-line CoolFan™ for cooling efficiency, design-matched Parker high-torque wheel motors. AntiVibe Power Platform® reduces vibration for the operator.
Transmission Filtration
61" 735BT
Integrated, replaceable, high-efficiency, fine-particle filter / Grasshopper CoolTemp Hydro-Max™ fluid withstands high and low temperature extremes for 1,000 hour change intervals.
72" 735BT
Integrated, replaceable, high-efficiency, fine-particle filter / Grasshopper CoolTemp Hydro-Max™ fluid withstands high and low temperature extremes for 1,000 hour change intervals.
True zero degree, turns within own length with counter-rotating, independently powered drive wheels. Seat is pivot point.
72" 735BT
True zero degree, turns within own length with counter-rotating, independently powered drive wheels. Seat is pivot point.
Steering
61" 735BT
One- or two-hand operation with adjustable, HydraSmooth™, dual levers that automatically return to neutral from either forward or reverse position.
72" 735BT
One- or two-hand operation with adjustable, HydraSmooth™, dual levers that automatically return to neutral from either forward or reverse position.
Brakes
61" 735BT
Dynamic braking through hydrostatic transmission.
72" 735BT
Dynamic braking through hydrostatic transmission.
Parking Brake
61" 735BT
Disc parking brakes, one for each drive wheel.
72" 735BT
Disc parking brakes, one for each drive wheel.
Attachment Drive
61" 735BT
Telescoping PTO shaft with two high-speed U-joints, Quik-D-Tatch® coupler and heavy-duty electric Mag Stop® blade clutch/brake.
72" 735BT
Telescoping PTO shaft with two high-speed U-joints, Quik-D-Tatch® coupler and heavy-duty electric Mag Stop® blade clutch/brake.
Tire Sizes
Standard Midmount Drivetire
61" 735BT
NA
72" 735BT
NA
Optional MidMountâ„¢Drive Tires
61" 735BT
NA
72" 735BT
NA
MidMountâ„¢ Front Caster Wheels
61" 735BT
NA
72" 735BT
NA
Standard FrontMountâ„¢ Drive Tire
61" 735BT
22x11.00x10 bar tread, high flotation, 4-ply rated
72" 735BT
22x11.00x10 bar tread, high flotation, 4-ply rated
Optional FrontMountâ„¢ Drive Tire
61" 735BT
20 x 10-10 turf tread (use w/ chains) 22 x 11-10 turf tread, 4-ply rated 22 x 11-12 Airless Turf Tweel
72" 735BT
20 x 10-10 turf tread (use w/ chains) 22 x 11-10 turf tread, 4-ply rated 22 x 11-12 Airless Turf Tweel
FrontMountâ„¢ Single Fork Tail Wheel Size
61" 735BT
13x6.50x6 rib tread, pneumatic (2)
72" 735BT
13x6.50x6 rib tread, pneumatic (2)
FrontMountâ„¢ Wide Stance Single Fork Tail Wheel Size
61" 735BT
NA
72" 735BT
NA
FrontMount Deck Tire
61" 735BT
9x3.50x4 (flat proof) 4-ply rated
72" 735BT
13x6.50x6 rib tread, pneumatic 4-ply rated
Dimensions
Height, Seatback
61" 735BT
47.0 in. (119.4 cm)
72" 735BT
47.0 in. (119.4 cm)
Height Seat Cushion
61" 735BT
30.5 in. (77.5 cm)
72" 735BT
30.5 in. (77.5 cm)
Height ROPS
61" 735BT
69.0 in. (175.3 cm)
72" 735BT
69.0 in. (175.3 cm)
Mower+Deck Length
61" 735BT
107.5 in. (273.0 cm)
72" 735BT
117.5 in. (298.5 cm)
Mower+Deck - Deck Folded
61" 735BT
91.0 in. (231.1 cm)
72" 735BT
104.0 in.(264.2 cm)
Deck Width - Side Discharge
61" 735BT
74.5 in. (189.2 cm)
72" 735BT
85.5 in. (227.3 cm)
Deck Width - Side Discharge 41"
61" 735BT
72" 735BT
Deck Width - Side Discharge 42"
61" 735BT
72" 735BT
Deck Width - Side Discharge 48"
61" 735BT
72" 735BT
Deck Width - Side Discharge 52"
61" 735BT
65.5 in. (166.5 cm)
72" 735BT
65.5 in. (166.5 cm)
Deck Width - Side Discharge 61"
61" 735BT
74.5 in. (189.2 cm)
72" 735BT
74.5 in. (189.2 cm)
Deck Width - Side Discharge 72"
61" 735BT
85.5 in. (227.3 cm)
72" 735BT
85.5 in. (227.3 cm)
Deck Width - Mulching
61" 735BT
62.5 in.(158.8 cm)
72" 735BT
73.5 in.(186.7 cm)
FrontMountâ„¢ Width
61" 735BT
50.0 in./67.0 in. (127.0 cm/170.2 cm)
72" 735BT
50.0 in./67.0 in. (127.0 cm/170.2 cm)
FrontMountâ„¢ Wheelbase
61" 735BT
51.5 in. (130.8 cm)
72" 735BT
51.5 in. (130.8 cm)
Weight
Weight
Power Unit+Deck (uncrated)
61" 735BT
1350 lbs. (612.3 kg)
72" 735BT
1475 lbs. (669.0 kg)
Weight FrontMountâ„¢ Power Unit only
61" 735BT
930 lbs. (421.8 kg)
72" 735BT
930 lbs. (421.8 kg)
Weight
Mower Deck
61" 735BT
420 lbs. (190.5 kg)
72" 735BT
545 lbs. (247.2 kg)
Weight Mulch Kit
61" 735BT
36 lbs. (16.3 kg)
72" 735BT
44 lbs. (20.0 kg)
Engine
61" 735BT
72" 735BT
Engine Type
B&S Vanguard Big Block, V-Twin
B&S Vanguard Big Block, V-Twin
Displacement
60.6 cu. in. (993 cc)
60.6 cu. in. (993 cc)
Lubrication
Pressure Lube
Pressure Lube
Crankshaft
Horizontal
Horizontal
Engine Cooling
Air
Air
Fuel Type
Gasoline - unleaded
Gasoline - unleaded
Fuel Capacity
7.2 U.S. Gal. (27.3 l)
7.2 U.S. Gal. (27.3 l)
Optional Fuel Capacity
NA
NA
Air Cleaner
Heavy-duty, remote mounted, cyclonic, dual element air filtration.
Heavy-duty, remote mounted, cyclonic, dual element air filtration.
Muffler
Ultra quiet, single, industrial type
Ultra quiet, single, industrial type
DuraMax Decks
61" 735BT
72" 735BT
DuraMax® Deck
DuraMax®
DuraMax®
Mulch Kit #
504569
504571
Deck Size
61"
72"
Cutting Height Range
1.25 to 5.0 in. (3.2 cm to 12.7 cm)
1.25 to 5.0 in. (3.2 cm to 12.7 cm)
Deck Construction
Tubular 2.25 in. x 4 in. boxed members with 0.25 in. gussets. Formed double thickness hardened steel (0.269 in. †7.6% thicker than 0.25 in. (6.35 mm)) truss spindle plane and (3) Sentry™ spindles and a triple-strength upper deck, 1/2 inch thick in stress zones. Geometrically engineered design with 7-gauge skirts withstands the brunt of commercial mowing. Anvil-edge design with o.5 in. (12.7 mm) reinforcement on front edge of deck.
Tubular 2.25 in. x 4 in. boxed members with 0.25 in. gussets. Formed double thickness hardened steel (0.269 in. †7.6% thicker than 0.25 in. (6.35 mm)) truss spindle plane and (3) Sentry™ spindles and a triple-strength upper deck, 1/2 inch thick in stress zones. Geometrically engineered design with 7-gauge skirts withstands the brunt of commercial mowing. Anvil-edge design with o.5 in. (12.7 mm) reinforcement on front edge of deck.
Deck Blades
21 in. (53.3 cm)
25 in. (63.5 cm)
Deck Spindles
Sentry™ Spindle System, 2.5 cm (approx. 1 in.) O.D. shaft. Double bearings greasable from top of deck. Spindle head designed to eliminate fiber wrap. Spindle cones shield housing and lower bearings from fiber wrap and dirt ingestion.
Sentry™ Spindle System, 2.5 cm (approx. 1 in.) O.D. shaft. Double bearings greasable from top of deck. Spindle head designed to eliminate fiber wrap. Spindle cones shield housing and lower bearings from fiber wrap and dirt ingestion.
Spindle Housing
8 in. (20.3 cm)-diameter machined aluminum housing with 6-bolt pattern.
8 in. (20.3 cm)-diameter machined aluminum housing with 6-bolt pattern.
Blade Drive
Maintenance-free gearbox with single Kevlar V-belt and idler arm tensioning.
Maintenance-free gearbox with single Kevlar V-belt and idler arm tensioning.
Deck Trimability
8.5 in. (21.6 cm)
13.75 in. (34.9 cm)
Starter & Electrical System
61" 735BT
72" 735BT
Battery
12 Volt
12 Volt
Starter
Solenoid shift
Solenoid shift
Ignition
Breakerless
Breakerless
Interlock System
Prevents engine start when PTO clutch is engaged or steering levers are in drive position. Allows operator dismount without engine shutdown only when PTO is disengaged and steering levers are locked in neutral.
Prevents engine start when PTO clutch is engaged or steering levers are in drive position. Allows operator dismount without engine shutdown only when PTO is disengaged and steering levers are locked in neutral.
Ultimate Operator Station
61" 735BT
72" 735BT
Operator Seat
Premium Comfort Seat, embroidered logo, iso-mounted, high-back, deep-cushioned, foam-padded CoolTemp Cordura-covered, padded arms/backrest with lumbar support and coil-spring suspension. Optional CoolTemp Cordura-covered Premier Suspension Seat.
Premium Comfort Seat, embroidered logo, iso-mounted, high-back, deep-cushioned, foam-padded CoolTemp Cordura-covered, padded arms/backrest with lumbar support and coil-spring suspension. Optional CoolTemp Cordura-covered Premier Suspension Seat.
Suspension
AntiVibe PowerPlatform™ with iso-mounted seat and footrest
AntiVibe PowerPlatform™ with iso-mounted seat and footrest
Console-mounted Instruments
Low engine oil pressure and parking brake warning lights, digital hour meter, work lights, ignition and push/pull PTO switches.
Choke integrated with throttle lever.
Low engine oil pressure and parking brake warning lights, digital hour meter, work lights, ignition and push/pull PTO switches.
Choke integrated with throttle lever.
Work Lights
Standard - LED
Standard - LED
Hour Meter
Standard
Standard
Transmission & Steering
61" 735BT
72" 735BT
Transmission Type
T6® hydrostatic transmission with tandem 16 cc Parker pumps-in-reservoir, in-line CoolFan™ for cooling efficiency, design-matched Parker high-torque wheel motors. AntiVibe Power Platform® reduces vibration for the operator.
T6® hydrostatic transmission with tandem 16 cc Parker pumps-in-reservoir, in-line CoolFan™ for cooling efficiency, design-matched Parker high-torque wheel motors. AntiVibe Power Platform® reduces vibration for the operator.
Transmission Filtration
Integrated, replaceable, high-efficiency, fine-particle filter / Grasshopper CoolTemp Hydro-Max™ fluid withstands high and low temperature extremes for 1,000 hour change intervals.
Integrated, replaceable, high-efficiency, fine-particle filter / Grasshopper CoolTemp Hydro-Max™ fluid withstands high and low temperature extremes for 1,000 hour change intervals.